
40kVA Service Saver for Multi-Meter Cabinet Restoration
A 40kVA Service Saver restores a missing leg at a multi-meter cabinet with a bus bar so every meter on that bank comes back. See when to use it instead of a single-home unit.

A 40kVA Service Saver restores a missing leg at a multi-meter cabinet with a bus bar so every meter on that bank comes back. See when to use it instead of a single-home unit.

A 50kVA PowerBack restores a missing leg at a multi-home pedestal so several houses come back at once. See when crews use it instead of a single-home Service Saver.

Compare 50A marine isolation transformers: Dual MP6, Charles, and Hubbell. See weight, size, soft start, boost, ABYC, and ignition protection side by side.

An Add-a-leg unit is one of the most practical tools a cooperative or municipal utility can put on a service truck. When a residential underground cable loses one hot leg or a neutral, the customer is immediately without full 120/240V service. The traditional response is

As ICD 705 and TEMPEST expectations rise, true electrical isolation is becoming essential in SCIF design. A properly specified SCIF isolation transformer delivers galvanic isolation, electrostatic shielding, and low external EMI to support cleaner power and stronger accreditation outcomes.

40kVA Service Savers helped define the higher-capacity end of the market. 50kVA units provide additional headroom for larger homes, multi-family services, and light commercial loads while supporting faster restoration and lower emergency O&M exposure.

A large utility reduced O&M pressure by deploying Service Savers on single-leg underground failures. Customers are restored in about 15 minutes, and the permanent repair moves into a planned capital window instead of emergency overtime.

Some utilities call portable temporary power restoration units a Dry Pak. Others call them an Autocart. These field names refer to the same practical category of equipment: a portable autotransformer that restores full 120/240V service at the customer meter while permanent repairs are completed. This

Faster temporary power restoration is one of the most practical ways utilities can reduce the real-world impact of single-leg failures and partial outages. Many utility teams operate under a reasonable assumption: when power goes out, they send a responder, the problem is found, and service
Portable auto-transformers that instantly restore lost 120V or neutral power at the meter.
3-phase toroidal power towers for industrial, BESS, and datacenter voltage management.
ABYC-compliant, UL Recognized shore-power isolation in a corrosion-resistant puck design.
Medical-grade isolation with ultra-low leakage current — IEC 60601-1 / UL 60601-1 compliant.
Custom-designed, 30 VA – 70 kVA. UL, CSA, CE, IEC 60601-1 certified.
Custom inductors, filter chokes, and power inductors — amorphous core, air-core foil, de-buzzing.
GOSS toroidal, O-, C-, and E-cores — wound, heat treated, and epoxy coated.
Cuffed foil laminates for superior electrostatic and grounding shields in transformers.
Precision flat magnet and specialty wire built for thermal and mechanical reliability.